Power of oven
Hello,
By accident I came accross the oven reflow kit in the E&A beurs in the Netherlands, and spoke to one of you colleagues. He mentioned hat the power of the oven should be around 1400 Watts. I have an oven at home which I was planning to use for reflow but it is rated at 640Watts. Will this be enough or should I start hunting for a new oven?
Cheers.
Geordy
Aw: Power of oven
Hi Geordy,
the recommended minimum Power is 1500W. The Oven in the Beta Reflow-Kit is a Severin To 2020.
http://www.beta-estore.com/rknl/order_product_details.html?wg=1&p=16
640W will not be sufficient to reach the temperatures needed for the reflow process.
Here is the whole kit.
http://www.beta-estore.com/rknl/order_product_details.html?wg=1&p=13
I also recommend the controller.
remote
Re: Power of oven
Hi,
The PDF states a maximum of 1500 Watts load so I would guess that any over from 1400 to 1500 Watts would be fine for the controller.
I would love to order the oven as well but I estimate the shipping costs will be more then the whole oven, anyhow hunting around for an over is also part of the sport.
Cheers
Geordy
Aw: Re: Power of oven
Hi Geordy,
please share us your adress (state/country) and we can tell you the shipping costs. Also you can send us an email to inf@pcb-pool.com with your detailed adress and with your question about the shipping costs. Maybe the costs are under your expectation ;-)
Your PCB-POOL® Service Team
PCB-POOL (R) Service Team
Power of oven
Hi,
have you tested ovens with fan inside?
I have seen your oven (and most of the ovens on the market) capable of 230C, but lead-free soldering requires 250-260C. It is a problem, isn't it? Or does your oven go above 230C?
Gyula Lukacs